New AS/AM58 A series: analogue family's growing!

New AS/AM58 A series: analogue family's growing! de Lika Electronic

Par: Lika Electronic  03/09/2012
Mots-clés : Capteurs, Encodeur, Codeurs

Lika Electronic keeps on expanding today its growing family of analogue encoders launching the versatile AS/AM58 A series. A comprehensive range of singleturn and multiturn encoders offered in a very wide variety of mechanical and electrical configurations to respond to the most diverse of analogue requirements in a cost effective manner. The complete series for your analogue needs AS/AM58 A series comes along with twin EM58 PA fully programmable absolute analogue encoder introduced just last month (see our July's newsletter at http://www.lika.it/eng/redazionali2.php?ID=36). The new line of analogue products surpasses previous series adding both mechanical benefits and functional advantages in a full range of straightforward solutions to suit multiple requirements. AS/AM58 A encoders afford standard 58-mm flange diameter housing with high IP67 protection rate (IP65 on shaft side) in both hollow (Ø 14, 15 mm) and solid (Ø 6, 8, 9.52, 10, 11, 12 mm) shaft versions. New circuitry also allowed for a more compact housing and a very slim profile (only 48 mm deep!). A great variety of mounting configurations is available for quick, safe and low-cost installation in your any applications. AS/AM58 A encoders boast a 12-bit singleturn resolution and up to 16384 turns in the multiturn version for an overall max 16-bit resolution (65536 information). The new improved hardware and software architecture further provides an enhanced range of voltage and current outputs: 0 to 5V, 0 to 10V, -5 to +5V, -10 to +10V, 0 to 20mA, 4 to 20mA and 0 to 24mA. Complementary and Zero-setting inputs are supplied standard along with the Fault output intended to warn against a circuit interruption (current output versions only). A further noteworthy benefit is the TEACH-IN function: a special version includes two START-STOP buttons located on the external enclosure, designed to easily programme the axis travel through the setting of the initial (start) and the final (stop) position. AS/AM58 A series employs optical technology and does not require batteries. Flexibility is further emphasized by the variety of output connections available: M23 12-pin and M12 8-pin connectors as well as cable output. They are all offered in both radial and axial configurations. In addition, MIL 7-pin connector can be supplied for spare parts and compatibility with old models. AS/AM58 A series is suitable for installation in a variety of industrial applications and finds typical use, just to give a mere cross section, in construction vehicles, construction equipment, building material machines, cranes, portal cranes and hoists. Furthermore it achieves successful integration into cable pulling mechanisms such as in recently unveiled SF- series (see our June's newsletter at http://www.lika.it/eng/redazionali2.php?ID=35#page=2). The analogue solution for your heavy-duty installations To complement its extensive line of analogue encoders, Lika Electronic has recently launched an updated version of the MH58S singleturn absolute encoder. This heavy-duty model is specifically designed to cope with the toughest requirements in your analogue applications and is typically suitable for demanding wind turbine installations. It employs magnetic sensor technology and is able to handle extreme environmental conditions providing smooth, efficient and reliable operation and superb signal clarity. Featuring a rugged housing with 10-mm diam. solid shaft and revised overmoulded circuitry, MH58S encoder ensures an IP67-rated protection and unparalleled resistance to large temperature fluctuations (-40°C +85°C / -40°F +185°F). It is installed using special electrically insulated shaft couplings designed to reduce backlash to zero and absorb efficiently shock and vibration impacts; thus it can both withstand superior radial and axial shaft loadings and deal with mechanical tensions. It boasts a 12-bit singleturn resolution and a full range of voltage and current outputs: 0 to 5V, 0 to 10V, -5 to +5V, -10 to +10V, 0 to 20mA, 4 to 20mA and 0 to 24mA. M23 12-pin connector and cable output are both available. It is further equipped with a Preset button located on the external enclosure to ease zero setting procedure. MH58S encoder is also available with SSI interface and additional incremental output and integrated resolver.

Mots-clés : Arbre creux, Arbre saillant, Capteur Absolu, Capteurs, Codeur absolu, Codeur absolu magnétique, Codeur magnétique, Codeur monotour, Codeur multitour, Codeur Optique, Codeur optique absolu, Codeurs, Codeurs Optiques, Encodeur, Encodeurs, Sortie analogique,

Autres produits et services de Lika Electronic

Aperçu Encoders for Industrial Robots, Motors and OEM applications de Lika Electronic
05/12/2016

Encoders for Industrial Robots, Motors and OEM applications

At latest SPS IPC Drives exhibition in Nuremberg Lika Electronic especially focused on the range of encoders designed to be integrated into robotic systems as well as into motors and OEM applications. They are compact and modular and tailored to exactly meet the specific needs of the individual automation processes.


Aperçu Heavy-duty encoders for shipbuilding industry de Lika Electronic
21/10/2016

Heavy-duty encoders for shipbuilding industry

Encoders for shipbuilding industry, marine installations and offshore facilities are born out of Lika's long-standing, solid experience in the field. They are designed to cope with extreme and high aggressive environmental conditions. Stainless steel enclosures and special surface treatments and sealings ensure safe protection against salt water and corrosion. They are rugged and can withstand heavy mechanical stresses, shocks and vibrations and large temperature fluctuations up to -40°C +100°C


Aperçu ATEX certified encoders de Lika Electronic
21/10/2016

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are


Aperçu Programmable draw-wire encoder, a first for market! de Lika Electronic
17/04/2015

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.


Aperçu All-round wheeled encoder for conveyor systems de Lika Electronic
03/03/2015

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.


Aperçu SMP encoder for linear guideways de Lika Electronic
03/03/2015

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.


Aperçu Un codeur, 65.536 codeurs de Lika Electronic
09/02/2015

Un codeur, 65.536 codeurs

Les codeurs incrémentaux programmables IQ58/IP58 de Lika Electronic sont conçus expressément pour être polyvalents et adaptables aux exigences spécifiques de chaque utilisateur. Ils garantissent un paramétrage complet au moyen du PC et proposent une large gamme d'options de connexion mécaniques et électriques. Ils sont donc entièrement personnalisables et offrent une flexibilité absolue pour répondre aux besoins industriels les plus pointus.


Aperçu Best in price analogue encoder de Lika Electronic
13/11/2014

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.


Aperçu Tough for rough! de Lika Electronic
13/11/2014

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.


Aperçu SFP draw-wire encoders gain analogue outputs de Lika Electronic
08/10/2014

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.


Aperçu SSI to Profibus IF55 gateway de Lika Electronic
08/10/2014

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.


Aperçu Change-over at your fingertips de Lika Electronic
17/09/2014

Change-over at your fingertips

LDT10 is the HMI touch panel specifically designed to easily interface and configure Lika RD rotary actuators, so auxiliary axes are more intuitive to operate and change-over operations become as fast as one touch.


Aperçu The bearingless solution for torque motors and heavy-duty applications de Lika Electronic
17/09/2014

The bearingless solution for torque motors and heavy-duty applications

SMRI from Lika Electronic is the miniature encoder intended for installation in dynamic and demanding rotary motion systems. It ensures safe and reliable operation even in harsh environments. A wide range of custom ring diameters and resolutions is available on request.


Aperçu Flat Design with Hollow Through Bore de Lika Electronic
17/09/2014

Flat Design with Hollow Through Bore

CH59 from Lika Electronic is the new incremental optical encoder featuring an extremely slim enclosure and high resolutions up to remarkable 204,800 PPR. Designed for electro-medical applications, analysis and laboratory equipment, motor testbeds.


Aperçu New IF55 converters, increased possibilities de Lika Electronic
17/09/2014

New IF55 converters, increased possibilities

Lika Electronic launches a new series of gateways to allow integration of SSI encoders into conventional fieldbuses or industrial Ethernet networks. Perfect for retrofitting and encoder installations where space is constricted. SSI to EtherCAT model released first.