CB59-CB60-CB61: FEEDBACK ENCODERS FOR GEARLESS MOTORS

CB59-CB60-CB61: FEEDBACK ENCODERS FOR GEARLESS MOTORS de Lika Electronic

Par: Lika Electronic  09/07/2012
Mots-clés : Encodeur, Codeurs, Encodeurs

Core of the elevator system is the motor used to raise and lower the elevator car. Gearless traction motor technology has brought about rapid changes within the elevator industry. A few reasons for its increased popularity include the ability of longer travels up to the tallest buildings; higher mechanical and electrical efficiency; elimination of parts and thus reduced physical size that allows for smaller machine room or machine-room-less (MRL) installations; and low overall maintenance. Gearless motors require rugged, vibration-resistant, high-accuracy and precision as well as long service life encoders for improving the car comfort and reducing the maintenance costs, at the highest safety levels. Most of all, they need compact encoders, especially for MRL installations. Lika Electronic has developed today a new range of products to meet the requirements of such innovative technology. CB59, CB60 and CB61 are the affordable incremental encoders expressly designed for reliable speed and position feedback in servomotors and especially gearless motors. They feature a space-saving and flat design with compact 58-mm flange diameter housing in both solid and hollow shaft configurations. CB59 comes in 12.7- and 15-mm blind hollow shaft and 42-mm only low profile; while CB60 and CB61 are offered with 10-mm diameter 1:10 taper shaft for absolutely backlash-free and torsionally rigid mating. The shaft rotational speed is up to 12000 rpm. Furthermore they are claimed to provide a variety of simple and quick yet sturdy coupling solutions by means of front and rear fixing plates for maximum safety and minimum time loss. These 5VDC optical encoders produce 2048 PPR sinusoidal signals phase-shifted by 90 electrical degrees having an amplitude of typically 1Vpp for speed feedback. Analogue sine and cosine incremental signals are safe and reliable and can be highly interpolated by the external electronics as the highest resolution is needed for control of a gearless application with a slow shaft speed, especially during gentle stopping and levelling at landings. Even better this further results in a great advantage in highly dynamic motion applications. Thus people can always enjoy quiet and smooth ride and every single movement is performed the safest and comfortable way, without exception. The maximum output frequency is up to 300 kHz. Moreover, a C-D absolute track is generated to learn the position of the motor poles as the start-up of gearless motors requires accurate detection of rotor and stator position. CB59, CB60 and CB61 encoders are insensitive to EMI thanks to the optical technology and always provide accurate signals which are not susceptible to electrical noise. They are equipped with shielded twisted pair cables and are also available with the most common controller connectors. In accordance with Lika's high-quality standards, they only fit selected superior components and are inspected one by one before delivery ensuring they can operate safely and reliably throughout the lifetime of the lift.

Mots-clés : Arbre creux, Arbre saillant, Codeur optique incrémental, Codeurs, Codeurs Optiques, Encodeur, Encodeurs, Industrie des ascenseurs, Sin-Cos, Sortie analogique,

Autres produits et services de Lika Electronic

Aperçu Encoders for Industrial Robots, Motors and OEM applications de Lika Electronic
05/12/2016

Encoders for Industrial Robots, Motors and OEM applications

At latest SPS IPC Drives exhibition in Nuremberg Lika Electronic especially focused on the range of encoders designed to be integrated into robotic systems as well as into motors and OEM applications. They are compact and modular and tailored to exactly meet the specific needs of the individual automation processes.


Aperçu Heavy-duty encoders for shipbuilding industry de Lika Electronic
21/10/2016

Heavy-duty encoders for shipbuilding industry

Encoders for shipbuilding industry, marine installations and offshore facilities are born out of Lika's long-standing, solid experience in the field. They are designed to cope with extreme and high aggressive environmental conditions. Stainless steel enclosures and special surface treatments and sealings ensure safe protection against salt water and corrosion. They are rugged and can withstand heavy mechanical stresses, shocks and vibrations and large temperature fluctuations up to -40°C +100°C


Aperçu ATEX certified encoders de Lika Electronic
21/10/2016

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are


Aperçu Programmable draw-wire encoder, a first for market! de Lika Electronic
17/04/2015

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.


Aperçu All-round wheeled encoder for conveyor systems de Lika Electronic
03/03/2015

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.


Aperçu SMP encoder for linear guideways de Lika Electronic
03/03/2015

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.


Aperçu Un codeur, 65.536 codeurs de Lika Electronic
09/02/2015

Un codeur, 65.536 codeurs

Les codeurs incrémentaux programmables IQ58/IP58 de Lika Electronic sont conçus expressément pour être polyvalents et adaptables aux exigences spécifiques de chaque utilisateur. Ils garantissent un paramétrage complet au moyen du PC et proposent une large gamme d'options de connexion mécaniques et électriques. Ils sont donc entièrement personnalisables et offrent une flexibilité absolue pour répondre aux besoins industriels les plus pointus.


Aperçu Best in price analogue encoder de Lika Electronic
13/11/2014

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.


Aperçu Tough for rough! de Lika Electronic
13/11/2014

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.


Aperçu SFP draw-wire encoders gain analogue outputs de Lika Electronic
08/10/2014

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.


Aperçu SSI to Profibus IF55 gateway de Lika Electronic
08/10/2014

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.


Aperçu Change-over at your fingertips de Lika Electronic
17/09/2014

Change-over at your fingertips

LDT10 is the HMI touch panel specifically designed to easily interface and configure Lika RD rotary actuators, so auxiliary axes are more intuitive to operate and change-over operations become as fast as one touch.


Aperçu The bearingless solution for torque motors and heavy-duty applications de Lika Electronic
17/09/2014

The bearingless solution for torque motors and heavy-duty applications

SMRI from Lika Electronic is the miniature encoder intended for installation in dynamic and demanding rotary motion systems. It ensures safe and reliable operation even in harsh environments. A wide range of custom ring diameters and resolutions is available on request.


Aperçu Flat Design with Hollow Through Bore de Lika Electronic
17/09/2014

Flat Design with Hollow Through Bore

CH59 from Lika Electronic is the new incremental optical encoder featuring an extremely slim enclosure and high resolutions up to remarkable 204,800 PPR. Designed for electro-medical applications, analysis and laboratory equipment, motor testbeds.


Aperçu New IF55 converters, increased possibilities de Lika Electronic
17/09/2014

New IF55 converters, increased possibilities

Lika Electronic launches a new series of gateways to allow integration of SSI encoders into conventional fieldbuses or industrial Ethernet networks. Perfect for retrofitting and encoder installations where space is constricted. SSI to EtherCAT model released first.