Another absolute first for Lika Electronic!

Another absolute first for Lika Electronic! de Lika Electronic

Par: Lika Electronic  07/01/2013
Mots-clés : Capteurs, Encodeur, Codeurs

SMRA is the new absolute rotary encoder which is suitable to meet the most demanding requirements, even in the heavy industry thanks to the very small and space-saving sensor and a wide choice of rings for direct installation in large diameter shafts (up to 380 mm / 15”). It comes in two models and offers a great deal of key features to enhance the capabilities of any specific industrial application. SMRA is able to combine in one package the advantages of the bearingless design with the benefits of the contactless and wear-free magnetic scanning. This results in a reliable measuring system affording high immunity to contaminants and virtually maintenance-free enduring service even under harsh conditions and in continuous operation. It mounts neither bearings nor components subject to wear or fatigue for dependable trouble-free and long-lasting working life; furthermore it does not require couplings, reducing sleeves or additional mounting accessories, thus installation is facilitated and sped up. The robust construction and encapsulated electronics guarantee high IP67 protection rate and great resistance to dust, humidity, oil, grease, water jets and chemical agents. In addition the non-contacting design and the magnetic sensing technology allow it to withstand great shocks and vibrations. The working temperature range is between -25°C +85°C, -13°F +185°F. SMRA is further designed to save space and ease integration thanks to the minimum sensing head foot-print and the shallow ring (20-mm depth only). Thus it can be installed directly in any shaft and even when the space is highly constrained. SMRA splits into two models. For most demanding applications that require a high performance and precision position & motion control solution such as torque motors, synchronous generators in direct drive wind turbines, rotary indexing tables as well as large hollow and solid shaft motors in general SMRAH model delivers the absolute position value with a 16-bit resolution (additionally up to 18 bits) through SSI and BiSS-C interfaces. It can fit two magnetic ring sizes having up to either 80-mm (3.15”) or 180-mm (7.09”) inner diameter (~105 mm / 4.13” and ~210 mm / 8.27” outer diameter respectively). SMRAL model is the absolute encoder designed to maximise ease of installation thanks to the very large mechanical tolerances (up to 2,5 mm / 0.098” !) between the sensor and the magnetic surface. It offers a choice of magnetic rings it can be coupled to: up to 80-mm / 3.15” inner diameter (~105 mm / 4.13” outer diameter) for 13-bit resolution version; up to 180-mm / 7.09” inner diameter (~210 mm / 8.27” outer diameter) for 14-bit resolution version; and up to 380-mm / 15” inner diameter (~410 mm / 16.1” outer diameter) for 15-bit resolution version. Also SMRAL model is available with SSI and BiSS-C interfaces. It is ideally suited for installation in large hollow and solid shaft motors, robotics, textile and wood, metal & stone working machineries, packaging lines, electro-medical instruments, mobile equipment. All SMRA absolute bearingless encoders are equipped with built-in LEDs which provide diagnostic information (activity and status/error) and further help during installation signalling out of tolerance alignment positions. Small foot-print, versatility and inexpensiveness make SMRA also ideal for redundant applications.

Mots-clés : Capteur Absolu, Capteurs, Codeur absolu, Codeur absolu magnétique, Codeur magnétique, Codeurs, Encodeur, Encodeurs, Interface Biss, Interface sérielle, Système de mesure magnétique, Turbines éoliennes,

Autres produits et services de Lika Electronic

Aperçu Heavy-duty encoders for shipbuilding industry de Lika Electronic

Heavy-duty encoders for shipbuilding industry

Encoders for shipbuilding industry, marine installations and offshore facilities are born out of Lika's long-standing, solid experience in the field. They are designed to cope with extreme and high aggressive environmental conditions. Stainless steel enclosures and special surface treatments and sealings ensure safe protection against salt water and corrosion. They are rugged and can withstand heavy mechanical stresses, shocks and vibrations and large temperature fluctuations up to -40°C +100°C

Aperçu ATEX certified encoders de Lika Electronic

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are

Aperçu Programmable draw-wire encoder, a first for market! de Lika Electronic

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.

Aperçu All-round wheeled encoder for conveyor systems de Lika Electronic

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.

Aperçu SMP encoder for linear guideways de Lika Electronic

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.

Aperçu Un codeur, 65.536 codeurs de Lika Electronic

Un codeur, 65.536 codeurs

Les codeurs incrémentaux programmables IQ58/IP58 de Lika Electronic sont conçus expressément pour être polyvalents et adaptables aux exigences spécifiques de chaque utilisateur. Ils garantissent un paramétrage complet au moyen du PC et proposent une large gamme d'options de connexion mécaniques et électriques. Ils sont donc entièrement personnalisables et offrent une flexibilité absolue pour répondre aux besoins industriels les plus pointus.

Aperçu Best in price analogue encoder de Lika Electronic

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.

Aperçu Tough for rough! de Lika Electronic

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.

Aperçu SFP draw-wire encoders gain analogue outputs de Lika Electronic

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.

Aperçu SSI to Profibus IF55 gateway de Lika Electronic

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.

Aperçu Change-over at your fingertips de Lika Electronic

Change-over at your fingertips

LDT10 is the HMI touch panel specifically designed to easily interface and configure Lika RD rotary actuators, so auxiliary axes are more intuitive to operate and change-over operations become as fast as one touch.

Aperçu The bearingless solution for torque motors and heavy-duty applications de Lika Electronic

The bearingless solution for torque motors and heavy-duty applications

SMRI from Lika Electronic is the miniature encoder intended for installation in dynamic and demanding rotary motion systems. It ensures safe and reliable operation even in harsh environments. A wide range of custom ring diameters and resolutions is available on request.

Aperçu Flat Design with Hollow Through Bore de Lika Electronic

Flat Design with Hollow Through Bore

CH59 from Lika Electronic is the new incremental optical encoder featuring an extremely slim enclosure and high resolutions up to remarkable 204,800 PPR. Designed for electro-medical applications, analysis and laboratory equipment, motor testbeds.

Aperçu New IF55 converters, increased possibilities de Lika Electronic

New IF55 converters, increased possibilities

Lika Electronic launches a new series of gateways to allow integration of SSI encoders into conventional fieldbuses or industrial Ethernet networks. Perfect for retrofitting and encoder installations where space is constricted. SSI to EtherCAT model released first.

Aperçu Extended diagnostics via PWM output signal de Lika Electronic

Extended diagnostics via PWM output signal

SMEx1 incremental linear encoders from Lika Electronic offer an additional diagnostic output to communicate fault and error conditions to a PLC or controller.